VACUUBRAND DCP 3000 - Manual (Page 27)

page 27 of 64
Keys
VENT:
(Functions only after connection of an
external venting valve)
• A short tap vents momentarily
• Pressing longer than 2 seconds vents
the system to atmospheric pressure.
ON/OFF switch
Connection plug of the
power supply
jacks for connection of external pressure
transducer and/or venting valve
serial interface
RS-232 C
Rear side DCP 3000
rating plate
Attention: Do not assemble or remove plug connections off-axis!
Orient the plug correctly before inserting. To connect additional
components use VACUU•BUS Y-adapters and extension cables. If
an external pressure transducer or valve is connected, it is recog-
nized automatically. Further information on how to use several sen-
sors or valves simultaneously is available upon request.