VACUUBRAND DCP 3000 - Manual (Page 25)

page 25 of 64
Use and operation
Assembling the country-specific power plug
+
The wall power supply is delivered with
power plugs for Europe, UK, US and Aus-
tralia.
+
Press the locking key on the wall power
supply to remove and to replace the power
plug with your country-specific plug.
+
Assemble the suitable power plug to the
power supply and lock.
Display and symbols
When switching on the DCP 3000 for the very first time, a menu to select
the language of the vacuum gauge’s menu is displayed. Select the de-
sired language (e.g., ”English”) by turning the selection knob and press
to confirm. Then select the pressure unit (”mbar”, ”Torr” or ”hPa”) in the
same way.
It is possible to access the language selection menu at any time by
switching on the vacuum gauge while keeping the selection knob
pressed.
After switching on the device, the version number of the software is
displayed, followed by the preselected function and the pressure reading.
Connected components (e.g., valves, external pressure transducer 3000
series) are automatically identified.