VACUUBRAND Exhaust waste vapour condenser Peltronic - Manual (Page 32)

page 32 of 41
Shutdown & storage
Short-term:
Remove catchpot and drain condensate.
Important: Comply with regulations when disposing of
solvents/condensates. Recycle if possible; purify if con-
taminated.
Has the exhaust waste vapor condenser Peltronic™ been
exposed to media which may damage the condenser’s
materials or form deposits?
Check the exhaust waste vapor condenser Peltronic™
(check inlet and outlet) and clean, if necessary.
Clean a contaminated exhaust waste vapor condenser
Peltronic™ as follows:
- Fill the condenser with a solvent (e.g., benzene) and
allow sufficient cleaning time. Observe all regulations
concerning usage and disposal of solvents!
- Drain the solvent and dispose of in accordance with
regulations. Repeat cleaning if necessary.
- Rinse the condenser several times with alcohol in or-
der to remove all solvent residues.
- Allow the emission condenser to dry.
Long-term:
- Take measures as described above regarding short-
term shutdown.
- Separate the exhaust waste vapor condenser
Peltronic™ from the application.
- Close inlet and outlet ports (e.g., with transport caps).
- Store the exhaust waste vapor condenser Peltronic™
under dry conditions.
NOTICE