VACUUBRAND Exhaust waste vapour condenser Peltronic - Manual (Page 25)

page 25 of 41
Vac control
1013mbar
Ext. Err.
Display of CVC 3000 during normal operation
Display of VNC 2 in case of fault
Exhaust waste vapor condenser Peltronic™ with CVC 3000
When switching on the controller, a connected exhaust waste vapor con-
denser Peltronic™ is detected automatically and supervised until the
controller is switched off. The condenser is displayed by a symbol on the
LCD of the controller with the actual condenser temperature shown in °C.
The exhaust waste vapor condenser Peltronic™ is switched off simulta-
neously with the controller.
In case of fault or if removing the connection cable while the controller is
switched on, a flashing warning triangle and a flashing condenser symbol
(without temperature reading) are displayed. If ”Sound” is set to ”On”, the
controller sounds eleven blips.
Exhaust waste vapor condenser Peltronic™ with VNC 2 (E)
(VARIO)
When switching on the controller, a connected exhaust waste vapor con-
denser Peltronic™ is detected automatically and supervised until the
controller is switched off.
The exhaust waste vapor condenser Peltronic™ is switched off simulta-
neously with the controller.
In case of fault or if removing the connection cable while the controller is
switched on, ”Ext. Err.” (”external error”) is displayed. If ”Sound” is
set to ”On”, the controller sounds additionally one blip.
Display of CVC 3000
in case of fault
condenser symbol
with condenser
temperature in °C 1013 .
2
mbar
10
Vac control
1013 .
2
mbar