VACUUBRAND Exhaust waste vapour condenser Peltronic - Manual (Page 11)

page 11 of 41
General information
Remove all packing material from the packing box. Re-
move the product from its packing-box and retain all pack-
aging until the equipment is inspected and tested. Re-
move the protective caps from the inlet and outlet ports
and retain for future use. Inspect the equipment promptly
and carefully.
If the equipment is damaged, notify the supplier and the
carrier in writing within three days. Retain all packing ma-
terial for inspection. State the item number of the product
together with the order number and the supplier’s invoice
number. Failure to check and give notice of damage will
void any and all warranty claims for those deficiencies.
Replace the protective caps if the equipment is not used
immediately. Store the equipment in dry and non-corro-
sive conditions.
+
Do not use any damaged equipment.
Intended use
+
Do not use any system parts on humans or animals.
+
Ensure that the individual components are only con-
nected, combined and operated according to their de-
sign and as indicated in the instructions for use. Use
only original manufacturer’s spare parts and ac-
cessories. Otherwise the safety and performance of
the equipment, as well as the electromagnetic compat-
ibility of the equipment might be reduced.
The CE mark may be voided if not using original man-
ufacturer’s spare parts.
+
Comply with all notes on correct vacuum and electri-
cal connections; see section ”Use and operation”, pg.
27.
+
The exhaust waste vapor condenser Peltronic™ is de-
signed for ambient temperatures during operation
NOTICE