USL JSD-60 Manual - Manual (Page 63)

Page 63
PEQ1Gain=0.0
PEQ2Freq=800
PEQ2Q=1.0
PEQ2Gain=0.0
[High Band]
HPFreq=800
Gain=-9.0
Delay=0.0
PEQ1Freq=4000
PEQ1Q=1.0
PEQ1Gain=0.0
PEQ2Freq=4000
PEQ2Q=1.0
PEQ2Gain=0.0
PEQ3Freq=8000
PEQ3Q=1.0
PEQ3Gain=0.0
SEQFreq=10000
SEQGain=0.0
HEQFreq=10000
HEQGain=0.0
System Configuration j60 and cfg Files
The system configuration files are text based and can be opened using a text editor like Note Pad. The files save by
the GUI have a “.j60” extension. The JSD-60 saves configuration data to the SD card with a “CFG” extension. Both
files types use a text format that can be read by the GUI to review or transfer settings.
A portion of the configuration file is shown below:
# USL JSD-60 s/n 1558 Configuration Data
# Written Fri Jan 28 15:15:20 2000 UTC
jsd60.sys.theater_name USL
jsd60.sys.theater_number 1
# Auditorium Number: 2
# Network Configuration
jsd60.sys.gateway
192 168 6 1
jsd60.sys.ip 192 168 6 141
jsd60.sys.mask 255 255 255 0
jsd60.sys.host JSD-60_2
jsd60.sys.tz -28800 1 PST PDT
# Save format data
jsd60.sys.input_mix
0 0 100 0 0 0 0 0 0 0
jsd60.sys.input_mix 0 1 0 100 0 0 0 0 0 0
jsd60.sys.input_mix 0 2 0 0 100 0 0 0 0 0
jsd60.sys.input_mix 0 3 0 0 0 100 0 0 0 0
jsd60.sys.input_mix 0 4 0 0 0 0 100 0 0 0
jsd60.sys.input_mix 0 5 0 0 0 0 0 100 0 0
jsd60.sys.input_mix 0 6 0 0 0 0 50 50 0 0