Toa VS-900 - Manual (Page 47)

3-19
CHAPTER 3. CONVENIENT FUNCTIONS
13. PAGING REDIAL
13.1. Function
This function permits redialing the last-paged zone by simple key operations.
13.2. Paging Redialing Operation
Step 1. Dial [ ][8][#] at the master station or telephone.
Step 2. A paging pre-announcement tone is transmitted to the last-paged zones, including All-zone Paging.
Make an announcement with the handset either lifted or unlifted.* 1
Step 3. To terminate the page, either replace the handset or press the [C] key.*
2
* 1 If using a telephone, lift the handset to place a paging call.
* 2 If using a telephone, replace the handset to terminate the paging call.
Note: The Paging Redialing function cannot be used for Emergency Paging.
TELEPHONE-RELATED FUNCTIONS
Outside telephone lines can be connected to the VS-900 system, permitting the system's master stations to
make or receive outside line telephone calls.
14. OUTGOING TELEPHONE CALLS
[System pre-programming]
A single-digit outside line access number ([0]-[9]) must first be programmed.
14.1. Outside Line Dialing Operation
Step 1. Dial the registered outside line access number (example: [0]).
A dial tone is heard.
Step 2. Dial the telephone number.
Step 3. Start the conversation when the called party answers.
Step 4. Replace the handset or press the [C] key after conversation completion.
0
Outside line
Ringing tone
Outside line telephone No.
Outside line access No.
Dial
tone