Toa VS-900 - Manual (Page 40)

3-12
CHAPTER 3. CONVENIENT FUNCTIONS
6. BUSY CALL FORWARDING
6.1. Function
Calls to a busy station* are automatically forwarded to a designated station*.
* The station which forwards calls (forwarded station) and the station to which calls are forwarded (receiving
station) must be either a master station or a telephone. Calls cannot be forwarded to a substation.
[System pre-programming]
To use this function, the Busy Call Forwarding function must be enabled in system programming.
6.2. Registration and Cancellation
Use the original station to register or cancel this function.
6.2.1. Registration
First dial [ ][6][5], and then the receiving station number (example: [9][3]) followed by [#].
Registration completion is indicated by a confirmation tone and the station is placed in standby mode.
6.2.2. Cancellation
First dial [ ][6][5], and then the original station number (example: [9][2]) followed by [#].
Cancellation completion is indicated by a confirmation tone. The current time is then displayed and the station
returns to standby mode.
6.3. Busy Call Forwarding Operation
Calls to a busy station (example: 92) are automatically forwarded to another designated station (example: 93).
1 1 : 5 9 am
1 1 : 5 9 am
Call
Call tone
No. 93
No. 11
No. 92
No. 10
Conversation