Toa VS-900 User Manual
Page 15
1-5
CHAPTER 1. SUBSTATION OPERATION
2.2. Call Time-Out
Calls from the substation can be automatically terminated when the specified time is reached if no response is
made.
[System pre-programming]
• Program whether to [Enable] or [Disable] the Call Time-Out function.
• Set a call time limit of 1-99 minutes in 1 minute units
Note
The Call Time-Out function cannot be used for calls from the emergency substation.
2.3. Being Called
Step 1. Following a brief call tone, the calling party's
voice is heard.
The call lamp lights (RS-180 and RS-190 only).
Step 2. Speak toward the panel.
Note
Lifting the handset permits handset conversation
when the RS-191 is combined with the RS-190.
Step 3. If the master station replaces the handset or
presses the [C] key, the conversation is
terminated.
The call lamp is extinguished (RS-180 and
RS-190 only).
Brief call tone
Voice
then
- C-A771DM (2 pages)
- C-A854H (1 page)
- C-BC100T (2 pages)
- C-BC11 (1 page)
- C-BC200H (4 pages)
- C-BC200K (4 pages)
- C-BC20U (1 page)
- C-BC450PM (4 pages)
- C-BC511A (4 pages)
- C-BC511C (2 pages)
- C-BC511P (4 pages)
- C-BC511U (4 pages)
- C-BC511W (4 pages)
- C-BC704PB (8 pages)
- C-BC704U (8 pages)
- C-BC704W (12 pages)
- C-BC711P (4 pages)
- C-BC711W (4 pages)
- C-BC771PM (6 pages)
- C-BC850U (6 pages)
- C-BC850W (6 pages)
- C-BL20 (1 page)
- C-CC351A NTSC (24 pages)
- C-CC514 NT (44 pages)
- C-CC714 NT (82 pages)
- C-CC514 (22 pages)
- C-CC514 (2 pages)
- C-CC714 NT (36 pages)
- C-CH100 (12 pages)
- C-CV854D-3 CU (16 pages)
- C-IF500 (8 pages)
- C-PH200 (16 pages)
- C-RM1000 HV (60 pages)
- C-RM700 (56 pages)
- C-VD6 UK (4 pages)
- CT-0420SG (1 page)
- CT-10VFGA (1 page)
- VS-900 (56 pages)
- RS-150 Manual (2 pages)
- RS-150 Installation (1 page)
- RS-190 (2 pages)
- RS-442 (2 pages)
- RS-450 (2 pages)
- RS-480 (2 pages)