Toa C-CC354A PAL - Manual (Page 4)

4
2. GENERAL DESCRIPTION
The C-CC351A NTSC is a 1/3 type, NTSC, 120 VAC, high-resolution color camera.
The C-CC351A PAL is a 1/3 type, PAL, 230 VAC, high-resolution color camera.
The C-CC354A NTSC is a 1/3 type, NTSC, 24 VAC or 12 VDC-operated, high-resolution color camera.
The C-CC354A PAL is a 1/3 type, PAL, 24 VAC or 12 VDC-operated, high-resolution color camera.
The 32X electronic sensitivity enhancer and wide dynamic circuitry combine to ensure clear surveillance in
dark locations or in backlit conditions.
3. PRECAUTIONS
• Do not direct the camera toward the sun or other extremely bright objects.
• Do not give the camera a great shocks or vibration, as this will damage the camera.
• It is recommended that the camera be always used in locations where the ambient temperature ranges from
–10°C to +50°C and humidity is less than 90%.
• To clean the camera, use a dry, soft cloth. Never use such volatile liquids as benzine and thinner because
the camera may be discolored or deformed.
• To clean the camera lens, use an ear syringe or photographic lens tissue to blow or wipe away dust or dirt.
• Installing the camera cables in close proximity to fluorescent lamps or other electrical appliances can
downgrade the picture quality. In such cases, change the wiring.
• If there is a strong electric or magnetic field near the camera, such as television transmission antennas,
motors or transformers, this may distort or roll the monitor picture. In such cases, run the entire wiring route
through metal conduit tubing.
• When operating on 12 VDC, use an external power supply unit with the following ratings:
• AC adapter or normal power supply unit (with no safety device): Over 12 VDC, 0.5 A
• Power supply unit with safety device: Over 12 VDC, 2.0 A
Note
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Modifications
Any modifications made to this device that are not approved by TOA Corporation may void the authority
granted to the user by the FCC to operate this equipment.
C-CC354A NTSC complies with Part 15 of the FCC Rules.