Toa C-CC354A PAL - Manual (Page 18)

18
Camera ID Title Setting
•
Camera ID title setting screen 1
You can use up to 8 alphanumeric characters and symbols to set a camera ID title. The title can be displayed
at one of the following 4 locations on the screen: lower right, lower left, upper left, and upper right.
Move the flashing [ ] cursor with the key and the
key to select either "ON" (display ON) or "OFF" (display
OFF), then press the SET key to register the setting.
When you select OFF and register its setting, the display
returns to the initial screen without displaying the camera
title. When you select ON and register its setting, the
camera ID setting screen 2 is displayed.
Move the flashing [ ] cursor with the key and the
key to select the title display position from Lower R,
Lower L, Upper L, and Upper R. Press the SET key for
setting the register display the camera ID title setting
screen 3.
•
Camera ID title setting screen 2
•
Enhancement setting screen 2
When you select MANUAL and register its setting, the
[
] cursor in the indication of "SOFT – – + – – SHARP"
flashes, permitting a level to be varied with the key
and the key. Pressing the SET key here for
registration will return the display to the initial screen.