Toa C-CC354A PAL - Manual (Page 21)

21
Normally, set the switch to this
position. Flickering of the picture may
interfere with the view under
fluorescent lamps in the area
with power frequency of 60 Hz
(50Hz) . In such cases, set the
switch to "1/100" ("1/120")
position, and the image free
from flickering can be obtained.
•
Synchronization switch
INT LL
Set the switch to this position
when a single camera is used
and it does not need to be
synchronized with other camera.
INT LL
Set the switch to this position
when locking multiple cameras
to the power frequency.
•
Flickering-reduction switch
1/120 (1/50)
1/100 (1/60)
[PAL]
[NTSC]
1/120 (1/50)
1/100 (1/60)
[PAL]
[NTSC]