Toa PC-2268 - Manual (Page 9)

9
Step 3. Set the input tap.
Disconnect the black lead (HOT) connected to the matching transformer, then connect it to the
desired input tap.
Matching transformer is installed inside the front case.
Step 4. Connect the safety wire to the rear case.
Connect the safety wire attached to the front case to the reinforcement bracket secured to the rear
case.
Step 5. Connect the speaker cables via the intermediate connector.
13 kΩ
0.8 W
0.4 W Impedance
100 V line
70 V line
1.7 kΩ
6 W
3 W
3.3 kΩ
3 W
1.5 W
6.7 kΩ
1.5 W
0.8 W
Factory-preset impedance: 1.7 kΩ
Black
(HOT)
White
(COM)
Matching transformer
Insert the hook on the end of the safety wire
through the cable entry opening, then hook it.
Rear case secured to a ceiling or a wall
Reinforcement
bracket
Intermediate
connectors
Safety wire
Safety wire
Cable entry opening
in the reinforcement bracket
Front case
4
5