Toa PC-2268 - Manual (Page 5)

5
4. WIRING DIAGRAM
5. INSTALLATION
5.1. Before Installation
The speaker front and rear cases are secured with adhesive tape (2 points) at both sides when shipped from
the factory. Before performing installation work, remove these tapes to separate front and rear cases.
8Ω
13 kΩ
6.7 kΩ
3.3 kΩ
0
Input terminal
Rear case section
HOT (black)
HOT
(+)
Intermediate
connector Intermediate
connector
Bridge
Front case section
Matching
transformer
1.7 kΩ (black)
COM (white)
COM (white)
COM
(-)
Note
The input line (black) is connected to 1.7 kΩ tap
at the factory.
Remove the tapes while placing the speaker on a stable
surface or while supporting it with hand. Failure to do so
may cause the case to fall, resulting in material damage
and possible personal injury.
CAUTION
Rear case
Front case
Adhesive tapes