Toa SR-RF8WP - Manual (Page 16)

16
9.3. Connecting the Rigging Frame to the Speaker
Connect the rigging frame to the speaker referring to the figures below.
Confirm the positioning of the horn (SR-C8LWP and SR-C8SWP only), then correctly mount the rigging frame
to the speaker by tightening the supplied nuts and bolts from both left and right sides.
When suspending the SR-C15BWP sub-woofer, be sure to mount it in the uppermost position (i.e.
immediately below the rigging frame).
Connection plate
Connection plate
Connection plate
Connection plate
[Speaker system assembly] [Sub-woofer system assembly]