Toa HY-MS7W-WP - Manual (Page 6)

6
Step 5. Mount the Bottom bracket to the speaker system.
Secure the bracket temporarily using the supplied bolts and flange nuts, then insert the J-spacer.
Bottom bracket
HX-7B-WP or HX-7W-WP
Flange nut for M6
(accessory)
Hex head bolt
M6 x 30 with spring
and plain washers
(accessory)
Rear bracket
J-spacer
(accessory)
Tightening torque
in Step 10: 5 N·m
Step 6. Mount the Wall bracket to the wall.
Use at least 8 bolts (4 top, 4 bottom) to mount to the wall.
Notes
• Make sure that two of the uppermost and lowermost mounting holes are
fixed to the wall with bolts, etc.
• Secure with a good balance of bolts in both left and right mounting holes.
60
(2.36")
(2.36")
(2.36")
(7.72")
(2.36")
(2.36")
(2.36")
60
60
196.2
60
60
60
70
70
(2.76")
(2.76")
Must be used.
Must be used.
[Wall mounting dimension]
Bolts and nuts for mounting the bracket on the wall are not supplied.
Use bolts and nuts that are appropriate for the wall’s structure and
composition. Failure to do so may cause the speaker to fall, resulting
in material damage and possible personal injury.
wArNINg
Note
To ensure ample work space during construction, keep the Wall bracket
at least 0.6 m (24") away from the ceiling and 1 m (40") from the left and
right walls.
Unit: mm
1 m (40")
or more
1 m (40")
or more
0.6 m (24")
or more
Ceiling
Wall Wall