Toa CR-413 - Manual (Page 8)

8
Step 2. Install the reinforcement brackets.
Screws used Bind head taptite screw type B 5 x 12 ..... 12 pieces (CR-273) or
24 pieces (CR-413)
Rear reinforcement
brackets
(One for the CR-273)
Bind head taptite screw type B 5 x 12
(Use the same type of screw for the
lower rear reinforcement bracket.)
Bind head taptite screw type B 5 x 12
(Use the same type of screw for the
upper and left side reinforcement brackets.)
Side reinforcement brackets
(One each at the left and
right sides for the CR-273)
The figure shows the CR-413.