Toa CR-413 - Manual (Page 17)

17
5. CABINET RACK INSTALLATION
5.1. Installation
Keep spaces around the rack as shown below to facilitate maintenance and operation.
CR-273
CR-413
Wall surface
Over 0.6 m (1.97 ft)
Over 0.5 m (1.64 ft) Over 0.5 m (1.64 ft)
Over 2.0 m (6.56 ft)
Front
Space required for maintenance and operation
280 (1
1.02)
220 (8.66)
435 (17.13)
360 (14.17)
440 (17.32)
566 (22.28)
Unit: mm (inches)
Front Cable entry opening
4-ø15 (0.59) for anchor bolts
5.2. Securing to Floor
• 4-ø15 (0.59") anchor bolt holes are provided in the bottom surface of the base for securing the rack to the
floor.
• Secure the rack to the floor with M10 - M12 anchor bolts referring to the dimensions of the bottom surface of
the base as shown below.
Secure the rack to the floor with anchor bolts and to the wall with steel
brackets to prevent it from being toppled over by earthquakes, etc.
CAUTION