Output setting items, Refer to p. 70, P.70-b1) – Toa A-9240SHM2 User Manual
Page 70: P.70-b2), P.70-b4), P.70-b3)
70
10.3.1. Output setting items
(B2) Output channel name setting
O U T 1 -
- - - - - - -
(B1) Output gain setting
OUT 1 - O U T 1 :
O N - 2 0. 0
Unless otherwise specified, use the Parameter setting knob for each parameter selection.
(B3) BASS and TREBLE settings
B A S S
0
T
R
E
B
L
E
0
(B4) Loudness compensation setting
L O U D N E S S -
O F F
Select the output channel using the Output channel selection key.
Confirm the selection by setting the Output channel ON/OFF key to ON.
Set the output channel gain using the Output volume control.
OUT1 – 2, Max.8 when T-001Ts are used (default: OUT1)
ON (default), OFF
–∞, –70.0 dB to +10.0 dB (default: –20.0 dB), 0.5 dB steps
Setting Range
Output Channel
Channel Control
Channel Gain
The flashing portion is the cursor position for entering channel name characters.
Select a character from the alphanumeric character list by rotating the Parameter setting knob, then move the
cursor with the Right shift key.
Entering a new name overwrites the existing name, if there is.
To delete the character, select [ _ ] (under-bar) with the Parameter setting knob. A space character cannot be
entered.
Up to 7 characters can be used to set the name.
Even when an output channel name has been set, some setting screens display the channel number, not the
set name.
When the output channel is stereo-linked (
), the name entry screen only for the odd channel is
displayed.
7 characters (default setting: OUT1 – 8)
Setting Range
Rotate the Parameter setting knob to set gains.
Press the Right or Left shift key to select BASS or TREBLE, of which gain value that flashes can be adjusted.
–12 dB to +12 dB (default: 0 dB), 1 dB steps
Setting Range
Rotate the Parameter setting knob to set the loudness compensation function ON/OFF.
Setting ON boosts low frequencies.
ON, OFF (default)
Setting Range