Toa A-9240SHM2 - Manual (Page 107)

107
Step 2. Insert the AN-001T module into the slots in
order without leaving slots open in between.
Notes
• Up to 8 audio inputs including AN-001T's
inputs can be used per amplifier.
• The mounting slots of the AN-001T and D-
001T/R may be changed between them.
Step 3. Insert the T-001T module into the slots,
starting in order from Slot 5 without leaving
slots open in between.
Note
Only Slots 5 – 7 can be used for the T-001T
module.
Step 4. Insert the ZP-001T module(s) into the slots in
order without leaving slots open in between.
Note
Start the insertion from Slot No. 1 when
neither D-001T/R nor AN-001T module is
used.
Step 5. Insert the 900 Series input modules.
Notes
• When Slot No. 1 is occupied with the D-
001T/R or AN-001T, Slot No. 8 is not used
for the 900 Series module. Likewise, when
Slot No. 2 is occupied, Slot No. 7 is not
used; when Slot No. 3 is occupied, Slot No.
6 is not used; and when Slot No. 4 is
occupied, Slot No. 5 is not used.
• Insert the 900 Series input modules in order
without leaving slots open in between.
• Use the open slots in increasing slot
number order even if the T-001T module is
mounted in an intermediate position.
• Insert modules into the slots, starting in
order from Slot No. 1 when not mounting
the D-001T/R, AN-001T, and ZP-001T.
Step 6. Insert the RC-001T module in the open slot
with the lowest slot number.
Step 7. Insert the C-001T module in the open slot
with the lowest slot number.
Step 8. Attach the blank panels supplied with the unit
onto open slots.
Note
If modules are not correctly installed, an error indication is displayed on
the VFD screen when the power is turned on. In such cases, check the
above procedures again and reinsert the modules.
Slot 1 2 3 4 5 6 7 8
T-001T
Slot 1 8
Slot 1 2 3 4 5 6 7 8
AN-001T
AN-001T
(Example when no D-001T/R is mounted)
D-001T/R
is mounted
(Example for an error indication)
M O D U L E S L O T 2 E R R O R
Slot 1 8
Slot 1 2 3 4 5 6 7 8
D-001T/R
is mounted
ZP-001T
ZP-001T
(Example when neither D-001T/R nor AN-001T is mounted)
Slot 1 4 5 6 7 8
Slot 1 2 3 4 5 6 7 8
Module is mounted T-001T
900
module
900
module
900
module
(Example when neither D-001T/R, AN-001T, nor ZP-001T
is mounted)
(Example when the T-001T is mounted in an
intermediate position)
Slot 1 8
Module is mounted C-001T
Slot 1 8 7 6
RC-001T Module is mounted