Toa A-9240SHM2 - Manual (Page 54)

54
0 1 - S C E N E 1
1
INPUT SELECT
I N 1 - I N 1 : O F F
I N 1
- - - - - - -
I N 1 - I N 1 : O N 0. 0
I-ON/OFF
IN : -∞, -70 to +10 (0.5 dB steps)
To/from lowermost screen
(p.58-A1)
P A G I N G O F F P A G I N G O N
I-ON/OFF
P or
(p.58-A3)
I N 1 - N O M - O FF I N 1 - N O M - O N
I-ON/OFF
P or
(p.59-A8)
(p.58-A2)
1
INPUT SELECT
P
I N 1 - S E N S I T I V I T Y - 1 0
(p.58-A4)
: -60, -54, -48, -42, -36, -30, -24, -18, -10 (dB) P
I N 1 - P H A N T O M O F F
(p.59-A5)
or : ON/OFF P I-ON/OFF
L O U D N E S S - O F F
(p.59-A10)
or : ON/OFF P I-ON/OFF
B A S S 0 T R E B L E 0
(p.59-A9)
: -12 to +12
(1 dB steps)
P
B A S S 0 T R E B L E 0
(p.59-A9)
: -12 to +12
(1 dB steps)
P
I N 1 - GATE - O FF I N 1 -GATE - O N
I-ON/OFF
P or
(p.59-A6)
GATE - THRESHOLED - 30 d B
(p.59-A7)
: -5 to -40 dB
(5 dB steps)
P
(p.59-A6)
The screen display examples may differ from actual displays.
The on-screen indications shown in blue are variable parameters
by key operation.
The symbols in the figure represent the following key operation.
: Screen shift keys (up and down)
: Screen shift key (right) or ENTER key
: Screen shift key (left) or ESC key
: PARAMETER knob
: INPUT VOLUME knob
: Input channel ON/OFF key
: Output channel ON/OFF key
I-ON/OFF
O-ON/OFF
P
IN
Normal use state
: Cycles meter display (FADER /LEVEL) below
the setting screen each time pressed.
: Selects characters to enter.
(Right shift key): Moves the cursor to the right.
To the next page
When Paging is set to OFF , or when Paging is set to ON and Trigger set to any type except VOX
When Paging is set to OFF , or when Paging is set to ON and Trigger set to any type except VOX
GATE ON: NOM selectable, GATE OFF: NOM fixed to OFF
10.2.1. Input setting flow chart for the channel on which the D-001T or D-001R is used
10.2. Input Setting Flow Chart
Setting items differ depending on the modules used for input channels.
Refer to this page when the D-001T or D-001R is used,
p. 56 when the ZP-001T is used, and p. 57 when the AN-001T is used.