Silencing an audio alarm – Compaq 2000 User Manual
Page 43
Operation 3-13
Silencing an Audio Alarm
To silence an audio alarm, press the TEST/ALARM RESET button.
1
Figure 3-5. TEST/ALARM RESET button
1 TEST/ALARM RESET button
IMPORTANT:
■
Even though an audio alarm may be silenced, the condition that caused the alarm
may still exist. For information on procedures to follow if the UPS detects an alarm
condition, see Chapter 6, “Troubleshooting.”
■
If a utility power failure caused the alarm (AC Input LED 1 or LED 4 red), the alarm
will be silenced after utility power is restored.