Compaq 2000 - Manual (Page 22)

2-2 Compaq 2000 Series UPS Operation and Reference Guide
Installation Requirements
This section lists items needed to install the Compaq 2000 Series UPS models.
Item(s) not supplied with the UPS kit
Tools
A medium flat-bladed and Phillips screwdriver may be needed.
Item(s) supplied with the UPS kit
The UPS kit should contain the following components:
Software/Reference Material
■ The Power Products Documentation CD containing the 2000 Series UPS
Operation and Reference Guide and the Compaq Power Products
Software Reference Guide
■ The Compaq Power Management Software Installation Instructions (a
booklet included with the CD) containing information on the installation
requirements for Compaq Power Management Software
■ Important Safety Information to be reviewed before installing this product
Hardware
The UPS ships with one or more of the following:
■ The T2000 and T2000j models ship with a non-detachable input power
cord and a 6-foot UPS/computer interface cable, Compaq part number
295245-003.
■ The T2400h model ships with a detachable input power cord; a 6-foot
UPS/computer interface cable, Compaq part number 295245-003; and
two 6-foot IEC to IEC power cords, Compaq part number 142263-001,
for load equipment power.
■ The T2400h-NA model ships with a detachable input power cord,
Compaq part number 162536-001; a 6-foot UPS/computer interface
cable, Compaq part number 295245-003; and two 6-foot IEC to IEC
power cords, Compaq part number 142263-001; for load equipment
power.