Tii 95S-2-00-0 - Manual

P/N 92233001 • Rev A• 1/20/2009
Warranty: If this unit fails during the warranty period, contact tii customer service to authorize return. Unit may be returned prepaid.
141 Rodeo Drive
Edgewood, NY 11717
Toll Free 888.444.4720
www.tiinettech.com
Model 95S-2-00-0
Sealed Subscriber Bridge
Module with RJ-45 Test Receptacle
Installation Note
Description
1. The tii 95S-2-00-0 Sealed Subscriber Bridge
Module with RJ-45 Test Receptacle maintains
a constant direct connection between
customer and central office service provider.
The Bridge is equipped with a test jack and
IDC terminations (see figure 1). The test jack
is provided as an access for test equipment to
assure a signal is being received and
transmitted properly.
Features
Figure 1
Installation
1. Hold the Bridge with the cover pivot side on
right.
2. Lower the pivot side edge inside the
designated installation cavity.
3. Engage the right end ledge under the locking
tab. (see figure 2)
4. Push the left side end down until the latch
snaps closed.
Figure 2