Tie Down Jet Rail XL - Manual (Page 9)

TIE DOWN ENGINEERING • 255 Villanova Drive SW • Atlanta, GA 30336
www.tiedown.com (404) 344-0000 Fax (404) 349-0401
The Jet Rail is an all galvanized steel PWC lift
designed for easy one person “launch and load”.
The small foot print under the ski allows easy walk
around while the watercraft is stored on the dock
or seawall. The 1200 lb. brake winch and mount
adjusts to any size watercraft and slides inside the
lift when not in use, saving even more precious
dock space. Carpeted bunk boards and all hardware
are included. All you add is your PWC!
Model: Jet Rail XL Part Number: 27377
Capacities
Weight of PWC: 950 lb (or capacity of
dock, whichever is less)
Length of PWC: 10 ‘-2”
NOTE: Gas and oil capacities must be added to
the “Factory Dry Weight” to get a true weight of
your PWC. Example dry wt. 600 lbs, 15 gallons
gas + 1.6 gallons of oil = 16.6 x 8 lbs= 132.8 bls.
600 lbs + 132.8 lbs. = 732.8 lbs.
Specifications (3/21/2003)
Weight without PWC 175 lbs
Length with extension in 7’ 1”
Length with full extension 10’ 8”
Width without PWC 22”
Width of dock mounting hdw. 18”
Length between dock mounting hdw 6’
Winch capacity
1200 lbs
Winch strap length 15’
Height without PWC at winch 36”
Height without PWC at bunk rail 19”
Maximum space between edge
of dock and rear dock mount 2.5”
Bunk Length 5’
Max. ht. from water to dock mount 22”
• One person launch n’ load
• Easy assembly
• Nothing else to buy
• Small “footprint”, takes up
less room on dock
Shipping Boxes:
Box 1: Dimensions 43” x 50” x 7-1/4”,
wt. 73 lbs.
Box 2: Dimensions 8-1/2” x 4-1/2” x 74”
wt. 50 lbs.
Box 3: Dimensions 22-1/4” x 8” x 48-1/4”,
wt. 58 lbs.
Assembly Time: Approximately 90 minutes
Tools required: Hammer, 9/16” Wrench,
3/4” Wrench, Ratchet, 9/16” Socket, 3/4”
Socket, 3/8” Socket, Phillips Screw Driver
The Jet Rail was not designed for alterations
such as electric winches, roller bunks or
modifications to the existing parts
Closed = 7'-1"
Extended = 10'-8"
6'
22"
5'
36"
061103,514