TeeJet LH INTELLITRAM 500 - Manual (Page 8)

G ENERAL OPERATION LH ”I NTELLITRAM ” 500 O PERATORS MANUAL
8 LH A GRO
OPERATING THE LH 500
HOLD KEY (POS. 1)
Key Description
Pressing this key stops the bout number from being counted. The
implement can be lifted without the bout number changing. This
function is typically used if the seed drill must be raised for an
obstruction. Once the obstruction has been cleared, press the
HOLD key again and the bout number will be counted automatically
again. When this function is active an icon will be displayed on the
screen.
FUNCTION SELECTION KEY (POS. 2)
Key Description
Pressing this key pages through the available operating functions.
An operating function is automatically selected – it is not necessary
to press other keys to accept the selected function.
MENU KEY (POS. 3)
Key Description
Menu
The computer alternates between the operating screen and the
main menu each time this key is pressed. The key has a toggle
function so if the operating screen is shown and the key is pressed
the main menu will be displayed instead and visa versa. If the key is
pressed whilst, e.g. encoding, the operating screen will be
displayed.
ARROW KEYS (POS. 4)
Key Description
The arrow keys are used to select and alter an encodement. The
UP and DOWN arrow keys are also used to move the cursor in the
operating screen, which allows moving between the 2 selectable
operating functions.