TeeJet LH 1200 - Manual (Page 9)

LH 1200 O PERATORS & F ITTING MANUAL O PERATING THE LH 1200
LH A GRO 9
AREA COUNTERS
The area counters start and stop automatically when the implement is
in work/not in work (implement sensor), and continue to count regardless of what
other function in the “primary functions“ has been selected.
Area is not being measured if an “r” is displayed on the screen.
Key Function
Area trip counter:
Pressing this key displays the effective worked area. Area is displayed
with 2 decimals from 0 – 99.99 ha. and with 1 decimal from 100 – 999.9
ha.
The area counter is started and stopped with the fitted area override
sensor. This ensures that area is only counted when the implement is
working.
The area trip counter counts synchronically with the area total counter.
NOTE! This key has a different function if 8888 or 9999 are encoded as
the working width.
Pressing this key for min. 3 seconds resets the counter.
Area total counter:
Pressing this key displays the area total counter. The total effective area
is displayed with 1 decimal from 0 to 999.9 ha. and without decimals from
1000 to 9999 ha.
This function can be used to sum up the worked area for a season or a
year.
The area total counter counts synchronically with the area trip counter.
NOTE! This key has a different function if 8888 or 9999 are encoded as
the working width.
Pressing this key again displays the area trip counter.
Pressing this key for min. 3 seconds resets the counter.