TeeJet SmartPad II Quick Start Guide - Manual (Page 11)

Bulletin 98-01122
R3
11
LIGHTBAR STATE DESCRIPTION
Mark A: Displayed when establishing the guidance point A of the initial
guideline.
Mark B: Displayed when establishing the guidance point B of the initial
guideline.
Swath #: A user selected lightbar message. When not on the initial
guideline the first character is either L or R for Left and Right of the initial
guideline. The number identifies how many lines left or right of the
initial guideline.
X-Track Error: A user defined lightbar message. This cross track error
message is displayed when the vehicle is on the guideline and there is
no error.
X-Track Error: A user defined lightbar message. In this example the
operator should steer to the left 2.3ft. (Assuming the system unit is set to
US and lightbar is set to Swath mode.)
Vehicle Heading Error: A user defined lightbar message indicating
the current heading error between vehicle heading and the bearing of
the guideline in degrees and decimal degrees. The arrow indicates
steering direction.
Ground Speed: A user defined lightbar message indicating the vehicle
speed in mile per hour (MPH). System unit is set to US.
Ground Speed: A user defined lightbar message indicating the vehicle
speed in kilometers per hour (KPH). System unit is set to Metric.
Course on Ground (COG): A user defined lightbar message indicating
the vehicles heading in degrees 0 to 359. The example to the left
indicates the vehicle’s course on the ground is due South (180 degrees).
Area Applied: A user defined lightbar message indicating the current
amount of area applied in acres. System unit is set to US.
Area Applied: A user defined lightbar message indicating the current
amount of area applied in hectares. System unit is set to Metric.
LIGHTBAR INDEX