Normal working mode (gpa mode) – TeeJet 834-P Sprayer Control User Manual

Page 4

834-P Sprayer Control

TECHNOLOGIES

98-70028-R0 4

PEED

/RPM

ISPLAY

(GPT

MODE

)

In this display the shaft RPM is shown on the display.

Press the key to advance to the pressure display.

RESSURE

ISPLAY

(GPT

MODE

)

In this display the pressure is shown in PSI.

Press the key to advance back to the rate display.

Normal Working Mode (GPA Mode)

Note: This section covers operation of the 834-P in Gallons Per Acre
mode. Instructions for Gallons Per Ton mode can be found on page 3.

NTRODUCTION

In the Gallons Per Acre (GPA) normal working mode, the display can show three different
pieces of information indicated by the LED’s below the display e.g.:

Application rate in GPA

Ground Speed

Pressure in PSI

Use of the keys during normal working mode is summarized as follows:

key is used to power ON and to select the information display

Auto/Man &

key combination is used to power OFF (when not spraying)

and

keys are used for changing the target application. In manual mode the

and

keys drive the regulating valve to adjust pressure.

tip

select

GPA

GPT

SPEED

RPM

PSI

Inch

lbs/rot

PROGRAM MODE push 3 sec.

Gal/min

@40 psi

P/300ft

P/rot

MPH
RPM

min

tip