TeeJet 834-P Sprayer Control - Manual (Page 17)

TECHNOLOGIES 834-P Sprayer Control
17 98-70028-R0
S
PRAY
T
IP
C
APACITY
Enter the combined capacity of all nozzles on the system. This should be measured in
Gallons Per Minute at 40 PSI. These capacities can be obtained from the nozzle
manufacturer’s catalog.
Use the
+
or keys to adjust this value. Once the correct units have been selected,
press the key to advance to the next step.
Example: Two 8004 nozzles would have a combined capacity of .8 GPM at 40 PSI.
S
WATH
W
IDTH
Enter the total swath width of the sprayer in inches.
Use the
+
or keys to adjust this value. Once the
correct units have been selected, press the key to
advance to the next step.
360
tip
select
GPA
GPT
SPEED
RPM PSI
On
Inch
lbs/rot
PROGRAM MODE push 3 sec.
Gal/min
@40 psi
P/300ft
P/rot
MPH
RPM
min