TechniSat TechniVision ISIO 55 - Manual (Page 6)

3. Satellite antenna
a Connect the LNB input on the TV to your external unit using a suitable coaxial cable.
To do this also observe points 8.1 and 10.5 of the instruction manual.
3.2 Antenna/cable connection (analogue and digital)
b Connect the antenna input for the LCD TV to either a
terrestrial antenna or to the connection socket for the cable or antenna
connection.
To receive DVB-T signals and DVB-C and analogue cable channels simultaneously,
use the TechniSat DVB C/T switch (part no. 0000/3263)
3.3 BluRay-/DVD-Player
c Connect your BluRay/DVD player using (for example) an HDMI connection cable with
an HDMI connection.
3.4 Surround sound/Hi-Fi amplifier
You can connect the LCD TV to a surround sound or hi-fi amplifier to obtain the best possible
sound quality.
3.4.1 Digital
d If your amplifier has an appropriate electrical input (S/P-DIF), connect the Audio out
digital socket to the input on your amplifier.
Depending on the broadcaster concerned, the stereo signal (PCM) and, where
broadcast, Dolby Digital signal (AC3) are available.
3.4.2 Analogue
d To do this, use a suitable cable to connect the cinch connectors for the analogue
audio output on the television to an input on your amplifier
(e.g. CD or AUX. Warning! The phono input is not suitable!).
3.5 Mains power connection
The television should only be connected to the mains power network (230V / 50Hz)
once it has been completely connected by cable to the associated components. This
will prevent damage to the TV or other components.
6