TechniSat TechniVision ISIO 55 - Manual (Page 36)

36
7.2 DVR playback
You can gain access to your DVR recording using the DVR Navigator.
7.2.1 Calling up the DVR Navigator
The DVR Navigator can be called up in the following ways. Depending on whether you are in
TV or radio mode, a list appears with all the TV or radio recordings available on the attached
storage medium.
In doing so also be absolutely sure to observe section 10.8 in the instruction manual.
The broadcast information can be faded in and out through repeated pressing of the
Info button.
7.2.1.1 When in TV mode
> In TV mode press the Stop / DVR button to switch directly to the DVR Navigator.
or
>
Open the channel lists navigator by pressing the OK button and switch to the DVR
Navigator by pressing the Stop/DVR button.
or
>
In the function selection select the Films / DVR item.
> Now call up the My Recordings folder.
7.2.1.2 From playback of a running / existing DVR recording
> Press the OK button to open the DVR Navigator.
or
>
In the function selection select the Films / DVR item.
> Now call up the My Recordings folder.