TechniSat TechniVision ISIO 55 - Manual (Page 23)

23
6.2 Channel selection
6.2.1 Using the channel up/down buttons
> You can switch between channels one at a time using the Channel +/- buttons on the
remote control or on the TV.
6.2.2 Using the numeric pad keys
> Use the numeric keypad keys to enter the number of the channel you want.
For example:
1 for channel slot 1
1, then 4 for channel slot 14
2, then 3, then 4 for channel slot 234
1, then 2, then 4, then 5 for channel slot 1245
When entering channel numbers with multiple digits, you have approx. three seconds
after pressing a key to complete the entry.
If you wish to enter a one, two or three-digit number, you can accelerate the switching
process by holding down the last digit for longer, or by pressing the OK button.
6.2.3 Using the TV list
> Press the OK key.
The TV channel list appears in television mode and the radio channel list in radio mode.
The channel currently selected is highlighted.
> You can view additional data about the current programme by pressing the INFO
button.
6.2.3.1 Selecting the channel
> You can now highlight the channel you want using the up/down arrow keys, the
page up/down keys and the numeric keypad keys.
> Exit the Navigator by the pressing the OK button; the highlighted channel is displayed
on the screen.