TechniSat TechniVision ISIO 55 - Manual (Page 17)

17
Antenna configuration (DVB-S)
In this step of the installation you can adjust your TV setup to the configuration of your
satellite antenna.
“Antenna configuration (DVB-T)” appears immediately if DVB-S has been disabled.
> Press the OK button to accept the default antenna setting and continue with the
“Antenna configuration (DVB-T)” section.
> If the configuration of your reception equipment does not match the default setting,
you can open the antenna configuration by pressing the Option button and adjust the
setting on your reception equipment according to section 10.5 in the instruction manual.
Antenna settings (DVB-T)
A channel spectrum with the signal levels of the various channels is displayed in this step in
order to be able to align the DVB-T antenna for the best reception.
The “channel search / ISIPRO” appears immediately if DVB-T has been disabled.
> Use the up/down arrow keys to highlight the Antenna supply field and confirm
by pressing the OK button.
> Switch the antenna feed on or off by using the up/down arrow keys to highlight to
relevant input and confirm with OK.
> To get to the next step of the installation, use the
arrow keys to highlight the Accept field and confirm with the OK button.