TechniSat TechniVision ISIO 55 - Manual (Page 34)

34
6.18.8 Search engine
> By using the Options selection to call up the Search item, the search engine web
page selected in section 10.4.4.7 of the instruction manual is automatically called up.
6.18.9 Status
> Under the Status option in the Options selection, select the general status or
the security status item to display various technical details concerning the active
website.
6.181.10 Ending Internet use
> To switch from a web page you have called up back to normal mode, press the WWW
button three times or press the TV/Radio button WWW.
7 Operating the DVR
The DVR function (DVR=Digital Video Recorder) means you no longer have to use an
external recorder (e.g. video or DVD recorder) to record programmes, as you can use this
function to record them to a USB storage device.
DVR recordings of channels from DVB-S, DVB-C and DVB-T sources can be made.
To do this make absolutely sure you observe the notes and settings under sections 8
and 9 of the instruction manual.
7.1 DVR recording
The following recording modes are available for DVR recording:
1. Instant recording
Select this type of recording to immediately record the programme currently being broadcast
at the push of a button.
2. Timer-controlled recording
This function is used to ensure that your television is switched on and off again for the
selected broadcast to make a recording, for example when you are out. You can do this by
programming the timer either manually or automatically, using the EPG.
3. Timeshift recording
Timeshift recording enables time-shifted TV viewing. You can start to play back a programme
while it is still recording (= timeshifting).
7.1.1 Instant recording
> Switch on the programme/source you want to record.
> Press the Record button to record the current programme.
> Press the Pause / playback button to play back the current programme from a
particular point.
> To continue playing back the programme from this point, press the Play / Pause
button again.