Speed settings, Calibrate settings, Wireless speed and distance pods – SUUNTO t4 User Manual
Page 33: 31 2.6.3. calibrate settings, 31 2.6.4. wireless speed and distance pods
2.6.2. Speed settings
In the Speed menu, you can set the speed limit on or off and define the upper and lower speed
limits.
2.6.3. Calibrate settings
In the Calibrate menu, you can calibrate your Suunto Foot POD or Suunto Bike POD. An alternative
way of calibrating your POD is to run or cycle a known distance, say 10 km, using the POD. If you
do not reset the stopwatch after completing the distance, you can correct the distance shown, for
example 9.6 km, from the settings. The device will then update the calibration value accordingly.
The GPS POD is also listed in the Calibrate menu but the calibration has no effect on the GPS
POD measurements. You will need this calibration only if you have, for instance, two Bike PODs
for different bikes. You can then pair one of them as GPS POD and use the calibration in the same
way as you normally would with Bike POD.
2.6.4. Wireless speed and distance PODs
Optional wireless speed and distance PODs are light, easy-to-use, and accurate. Since the devices
(Suunto Foot POD, Suunto Bike POD, and Suunto GPS POD) differ from each other, they come
with separate user's guides, which you should read for more detailed information on their use.
When you have paired and calibrated a speed and distance POD with your Suunto t4, you can
take advantage of the Speed and Distance mode, as well as speed and distance-related control
functions and information.
31