SUUNTO AMBIT2 R User Guide - Manual (Page 31)

While the stopwatch is running, you can:
• press [View] to switch between the time and lap time shown on
the bottom row of the display.
• switch to TIME mode with [Next].
• enter the options menu by keeping [Next] pressed.
7.3 Countdown timer
You can set the countdown timer to count down from a preset time
to zero. After you have activated the countdown timer, it is shown
as an additional display after the TIME mode.
The timer makes a short sound every second during the last 10
seconds and sounds an alarm when zero is reached.
To set the countdown time:
1. Press [Start Stop] to enter the start menu.
2. Scroll to TIMERS with [Light Lock] and select with [Next].
3. Scroll to Countdown with [Light Lock] and select with [Next].
4. Press [View] to adjust the countdown time.
5. Set the hours and minutes with [Start Stop] and [Light Lock].
Accept with [Next].
6. Press [Start Stop] start the countdown.
31