SUUNTO AMBIT2 R User Guide - Manual (Page 122)

NOTE: You can pair different types of power PODs with your
Suunto Ambit2 . For more information, see the power POD user
guide.
TIP: You can also activate the heart rate belt by moistening and
pressing both electrode contact areas.
Troubleshooting: Heart rate belt pairing fails
If the heart rate belt pairing fails, try the following:
• Check that the strap is connected to the module.
• Check that you are wearing the heart rate belt correctly (see
11.4 Putting on heart rate belt ).
• Check that the electrode contact areas of the heart rate belt are
moist.
For more information on pairing PODs, see the POD user guide.
16.1 Using Foot POD
When using a foot POD, the POD is auto calibrated by GPS at short
intervals during exercise. However, the foot POD always remains
the source of speed and distance when it is paired and active for
the given sport mode.
Foot POD auto calibration is on by default. It can be turned off in
the sport mode options menu under ACTIVATE, if the Foot POD is
paired and is used for the selected sport mode.
122