2 calibrating power pods and slope – SUUNTO AMBIT2 R User Guide User Manual
Page 124
NOTE: If the foot POD connection was unstable during the
calibration exercise, you might not be able to adjust the distance in
the distance summary. Make sure that foot POD is attached
properly according to instructions and try again.
If you are running without a foot POD, you can still get running
cadence from the your wrist. Running cadence measured from wrist
is used together with FusedSpeed and is always on for specific sport
modes including running, trail running, treadmill, orienteering, and
track and field.
If a foot POD is found at start of an exercise, running cadence
measured from wrist is overwritten by foot POD cadence.
16.2 Calibrating power PODs and slope
Suunto Ambit2 automatically calibrates your power POD when it
finds the POD. You can also calibrate the power POD manually at
any time during an exercise.
To manually calibrate a power POD:
1. While you are in a sport mode, keep [Next] pressed to access the
options menu.
2. Stop pedaling and lift your feet off the pedals.
3. Scroll to CALIBRATE POWER POD with [Light Lock] and select
with [Next].
124