Citizen Systems Citizen Swift 90 - Manual (Page 39)

39
ASF Specification
Bin stacker capacity
Capacity (sheets)
Weight Size B5 A4 Letter Legal B4
60 (g/m²) 120 120 120 100 84
90(g/m²) 82 82 82 65 54
Operating Temperature +5 to +35ºC, No condensing, Relative Humidity 30 to 80%
Storage Temperature -30 to +65ºC, No condensing, Relative Humidity 5 to 85%
Acoustic noise level Paper feeding noise: less than 50dB(A)
Changing Between Continuous Forms And Single Sheets
Once you have installed the automatic sheet feeder by the procedures above, you can alternate
between continuous forms and single sheets easily.
Changing From Single Sheets To Continuous Forms You do not have to remove the sheet
feeder when using continuous forms. All you need to do is to set the paper select lever to the
position.
Changing From Continuous Forms To Single Sheets You do not have to remove the continu-
ous forms from the tractors when printing on single sheets. You need only carry out the following
steps:
1 Turn the printer off line.
2 If the continuous form paper is in the tear off position, press the PARKILOAD key once;
if it is in the TOF position press the PARK/LOAD key twice. The paper will retract to the
parking position.
3 Set the paper select lever to the single sheet position.
The Colour Kit
The colour kit allows you to print in a wide range of colours, especially from graphical programs
such as Windows. You can use it via commercial software or with your own programs.
You will obviously need a colour ribbon with the colour kit, but
apart from replacing this ribbon and the usual cleaning and
maintenance your colour option should give you reliable and
trouble free service.
The colour kit consists of a colour ribbon cartridge and a mo-
tor driver colour unit.
Installing The Colour Kit To install the colour kit, simply fol-
low these steps: