Canon EOS 60D - Manual (Page 61)

61
C Creative Auto Shooting
(3) Drive mode/Flash firing
When you press <0>, the drive mode and flash firing setting
screens will appear. Set as desired and press <0> to finalize the
setting and return to the Quick Control screen.
Drive mode: Turn the <6> dial to set it as desired.
(Low-speed continuous shooting): Shoot continuously at a
maximum of approx. 3 frames per second (fps).
(Self-timer: 10-sec./Remote control): When you press the
shutter button, the picture will be taken after a 10-sec. delay.
See the notes for “Using the Self-timer” on page 82.
Remote control shooting is also possible (p.126).
* You can also set the drive mode on the LCD panel while the Quick Control
screen is not displayed. Look at the LCD panel, press the button,
and turn the <5> or <6> dial to set as desired.
Flash firing: Press the key to set it as desired.
(Auto flash), (Flash on), or (Flash off) can be
selected.