Canon EOS 60D - Manual (Page 32)

32
The camera is compatible with SD, SDHC, and SDXC memory cards.
The captured images are recorded onto the card (sold separately).
Make sure the card’s write-protect switch is set upward to
enable writing/erasing.
1
Open the cover.
Slide the cover as shown by the
arrows to open it.
2
Insert the card.
As shown by the illustration, face
the top of the card toward you.
Insert the card straight in all the way.
3
Close the cover.
Close the cover and slide it in the
direction shown by the arrows until it
snaps shut.
When you set the power switch to
<1>, the access lamp will blink and
the number of possible shots will be
displayed on the LCD panel.
Installing and Removing the SD Card
Installing the Card
Write-protect switch
Possible shots
The number of possible shots depends on the remaining capacity of the
card, image-recording quality, ISO speed, etc.
Setting the [1 Release shutter without card] menu option to [Disable]
will prevent you from forgetting to install a card (p.278).