Solvline SG-2xxx Series - Manual (Page 64)

SerialGate User Guide
64
STATUS
Check the status of the device server.
To go to the top menu, use the  button on the device server.
Sub menu Function Key Usage
CONNECTIONS
Displays the network connection status
of each ports. When the ports are
connected, the color of the port number
will be reversed and shown in black.
SERIAL PORTS
Displays the status of the serial ports
(TX, RX count, signals, etc.)
 :
Move to previous serial port
 : Move to next serial port
UPTIME Displays the system uptime
CPU LOAD Display the CPU usage
SETTINGS
Modification of the operating environment of SerialGate is done here.
To configure the settings, use the OK button from the menu to switch from the view mode to edit
mode. After any changes are made, use the OK button to quit from the edit mode. Then, use the 
button to move to the top menu to save the changed settings. Select ‘YES’ to save and apply the
settings.
Sub menu Function Key Usage
WAN Configure WAN port
 : Move to previous selection
 : Move to next selection
 :
Apply the change immediately
OK : Toggle between
View/Edit mode
LAN Configure LAN port
SERVICES
Configure/Enable/Disable FTP and
TELNET services