Solvline SG-2xxx Series - Manual (Page 50)

SerialGate User Guide
50
Menu Default Descriptions
SNMP v1/v2/v3
Agent
Disable
Enable or disable Simple Network Management Protocol
(SNMP) support. (Options : Disable/Enable)
V1/2 Attribution ReadOnly
SNMP V1/2 Attributes can read and write by SNMP Agent.
In order to read attributes only, change the feature to
"ReadOnly".
In order to read and write attributes, change the feature to
"ReadWrite". (Options : ReadOnly/ ReadWrite)
V3 Attribution ReadOnly
SNMP V3 Attributes can read and write by SNMP Agent.
In order to read attributes only, change the feature to
"ReadOnly".
In order to read and write attributes, change the feature to
"ReadWrite". (Options : ReadOnly/ ReadWrite)
V3 Username/
Password
serialgate
/
administrator
Configure the Username and the password when use SNMP
V3.
The Password should be at least 8 character string
TRAP IP/ Port 0.0.0.0/162
Configure the server IP address and Port which receive the
TRAP information.
System reset
notification
Enable
If Enable is selected, notify the “System reset info.”
(Option : Enable, Disable)
Port connect
notification
Disable
If Enable is selected, notify the “Serial Port opened info.”
(Option : Enable, Disable)
Port disconnect
notification
Disable
If Enable is selected, notify the “Serial Port Closed info.”
(Option : Enable, Disable)