Solvline SG-1160 - Manual (Page 25)

SerialGate User Guide
25
The followings are main features of WAN Configuration.
Menu Default Description
Device Name SerialGate Name of the current device
Line Type Static IP How IP is obtained when network is connected.
IP Address 192.168.0.223
Current IP address SerialGate is assigned to.
(When line type is Static IP, manually enter an appropriate IP
address. When line type is DHCP, current IP is displayed, but
it is not editable.)
Subnet Mask 255.255.255.0
Current subnet mask SerialGate is assigned to.
(When line type is Static IP, manually enter an appropriate
subnet mask. When line type is DHCP, current subnet mask is
displayed, but it is not editable.)
Gateway 192.168.0.254
Current default gateway SerialGate is assigned to
(When line type is Static IP, manually enter an appropriate
default gateway. When line type is DHCP, current default
gateway is displayed, but it is not editable.)
DNS 168.126.63.1 Domain Name Service IP address
For SG-1160, the main features of LAN Configuration are as follows.
Menu Default Description
Bridge Disable Enable or Disable Bridge Mode
IP Address 10.10.1.1 Set the current IP address (Bridge : disable only)
Subnet Mask 255.255.255.0 Set Subnet Mask address (Bridge : enable only)
When it is used in the bridge mode, LAN and WAN ports are not used as their original intention but will
be connected to other SerialGate and form a network with daisy chain method.