SilentKnight SK-FFT - Manual (Page 46)

SK-FFT Installation and Operation Manual
6-4 54711
6.2.8 Zone Active
Each zone has an Active LED (see Figure 6-1). The zone's Active LED will illuminate
when a remote handset is plugged into that zone. The LED will turn off when the
handset is removed from the zone.
6.2.9 Zone Trouble
Each zone has a Trouble LED (see Figure 6-1). The zone's Trouble LED will blink
when specific SLC issues occur such as a missing device or double address.
Pressing the Silence Key will cause the zone trouble LED to be on solid. Once the
zone trouble is corrected, the LED will turn off.
Figure 6-1 LED Operations
Answer
LED
Active
(green)
Trouble
(amber)