2 wiring slc devices in style 6 & 7 (class a), Configuration -4 – SilentKnight SK-FFT User Manual

Page 32

Text mode
Original mode

SK-FFT Installation and Operation Manual

4-4

54711

4.3.2

Wiring SLC Devices in Style 6 & 7 (Class A)

Configuration

Figure 4-3 illustrates how to wire the SLC loop for Style 6 or Style 7 Class A
installations.

Note: Style 6 does not require the use of isolator modules.

Figure 4-3 Class A SLC Configuration

Note: No t-taps allowed on Class A SLC loops.

Caution

For proper system supervision do not use looped wire under terminals marked SLC + and –
of the SLC device connectors. Break wire runs to provide supervision of connections.