beautypg.com

4 addressing sk-minimon slc devices, Addressing sk-minimon slc devices -5 – SilentKnight SK-FFT User Manual

Page 33

background image

SLC Device Installation

54711

4-5

4.4 Addressing SK-Minimon SLC Devices

All SK-Minimon devices are addressed using the two rotary dials that appear on the
device board. Use the ONES rotary dial to set the ones place in a one or two digit
number, and use the TENS rotary dial to set the tens place in a two digit number.

SK-Minimon modules can be assigned any unique address from 1 to 48.

Example 1: To select device address 10, turn the ONES rotary dial to 0 and the
TENS rotary dial to 1 as shown in Figure 4-4.

Example 2: To select device address 42, turn the ONES rotary dial to 2 and the
TENS rotary dial to 4 as show in Figure 4-4.

Figure 4-4 SK-Minimon SLC Device Addressing using Rotary Dials

Example 1: Device set to 10

Example 2: Device Set to 42