SilentKnight 5670 IntelliKnight Facility Management Software - Manual (Page 21)

Installation and Operations Manual
P/N 151241-L8 17
Detector Status Data
When you upload detector status from an IntelliKnight or IFP-Series panel, you will
have a file containing the status of all detectors in the system. Not all the detectors may
be of interest to you at any given time. You can use SKSS to select only detectors that
meet particular criteria, such as, detectors that are out of compliance or that need
maintenance. You can also sort the file by various criteria and print the information that
you need.
1. Once detector status has been uploaded, select Open Detector Status from the File Menu.
2. Select a file to open. You can scroll through the list of available files or enter the file name in
the File Name area in the dialog box. Detector status files have the extension:
.[Panel Type]Detector.
3. The Detector Status View will display. Select options for controlling how the detector status
is displayed on screen and printed. A dialog box similar to the one below will display. Refer
to the options on the help screen for complete information about how to select these
options. If you want a printed report of the data, select Print from the File Menu.
Figure 4: Detector Status Dialog Box