Warning, 2 magazine disassembly – SIG SAUER P290 User Manual
Page 39
www.sigsauer.com
39
when it counts
™
waRning
The magazine spring is compressed. guard the magazine insert and
magazine spring with your thumb to control the release of magazine spring
tension. uncontrolled release can cause injury. Wear eye protection.
Step 1
Step 2
8.2 magazine disassembly
1. locate the bottom of the magazine floorplate.
2. using a punch or similar tool , depress the magazine insert and push the
magazine floorplate forward until it is clear of the magazine tube.
3. remove the magazine spring and magazine follower from the magazine
tube. This level of disassembly is sufficient to allow a thorough cleaning
after shooting.
Step 3